There Are Two Sides to Every Story or How NOT to Paint a Cabinet Door

Sorry for such a long delay since the last post - this "little" project took me just a bit longer than anticipated. . .

So a few weeks ago I decided I would like to spruce up the ol' powder room. It looked boring, the wall color was dingy and discolored. . .no one wants to use a bathroom that looks dirty even when its clean.

Since all anyone wants to see these days are the before and after pics, I will oblige:

And here's a better picture of the old outdated oak vanity after a paint job and some added hardware:

I wish I had taken a better close up of the oak cabinet before, but I kind of didn't know I was going to paint it until much later. . .

It really all started with "I'd like to paint the bathroom gray". I had seen a picture on Joss and Main that had the exact color I had in mind -

(FYI - the actual color of the bathroom is exactly the one in the above picture but it is so hard to photograph correctly to bring out the yumminess of the color!)

Anyways, headed down to Lowes, got me some paint sample in Valspar "Opal Slate". (I'm telling you, it really is the same as the color in the Joss and Main pic!! I swear!!)

(P.S. This was actually not the paint I intended to get - I wanted the Olympic No-VOC paint mixed in a Valspar color - they are both brands sold at Lowes so I thought no biggie. The Lowes employee proceeds to tell me it is impossible. I say, how can it be impossible when I have had the Olympic paint mixed in colors from Behr (which is sold at Home Depot btw) and other places, you just pull it up on your computer thingy, right? We go back and forth, when she finally tells me that for some reason, the computer won't let her pull up Valspar colors to mix in Olympic paint because they are competitors. This is beside the fact that Behr, Sherwin-Williams, etc. are also competitors of Valspar and Olympic and yet they can be pulled up on the computer. Sounds like a load of crap to me. But she tells me that Valspar now makes a low-VOC paint called Valspar Ultra that also contains primer. Fine, whatever, I'll take it. As it turns out, I actually really liked this paint - consistency and coverage were very good and it didn't show brushstrokes hardly at all, and so it worked probably better than the Olympic paint would have anyways. So I guess it was worth the hassle.)

So I started painting. It took forever because the previous owners, instead of taking down the wallpaper in there, added crazy wall texture that can actually draw blood if you brush against it and painted over it. Texture = Takes FOREVER to Paint! I got one wall done and thought it was way too dark. My husband suggested to go bold and keep it. I was unsure, so I left it up there on the wall to consider.

The next logical step I take in a situation like this, when I am in the middle of a project and lose my vision and am unsure how to proceed - why, I start a new project, of course!

I'm thinking, maybe it would look good if I "updated" the vanity by painting it a nice espresso brown and add chrome hardware. Plus, it will give me an opportunity to try out the Rustoleum Cabinet Transformations stuff before I try it on my kitchen cabinets. (Let me tell you, it is a good thing I did this. . .)

So I buy the small version that ended up being more than plenty for the bathroom vanity - and for $30, it worked for me! Got the paint it comes with mixed in "Espresso".

So I take the doors and the drawer fronts off, and I read the instructions. It says that if you don't want to see the wood grain, use a wood filler, then proceed with instructions. I know I want a smooth finish so I say, ok, lets do this wood filler thing. I buy some at Lowes, I'm set. (So I think.) I proceed to coat my cabinet doors and drawer fronts in wood filler. It takes FOREVER. And it looks something like this - 

I get them all done, let them dry, and then spend more HOURS sanding them to as smooth a finish as I can manage, all the while becoming coated in dust (I was wearing a mask, not sure what good it did though). And I'm looking at this thinking, this just does not look right. So here's my womp, womp moment:

CABINET REFACING NO-NO #1:  Wood filler is not the same thing as wood grain filler. Wood filler is not an appropriate substance to use for filling wood grain.

Ok, so you may be thinking, well, yeah, duh they are not the same thing. But to be fair, it did not say anything about wood *grain* filler, only said to use wood filler, and Lowes didn't even have wood grain filler, so the thought didn't even cross my mind. It was only after some research online did I discover that wood grain filler is a brush on deal that would have been more appropriate to use, but too late for that, so moving on . . . just glad I figured it out before I spent probably 1000 hours doing that to the kitchen cabinets only to find I had destroyed them.

Although, at this stage in the game, I didn't know I had destroyed the front of my bathroom cabinet doors and drawer fronts. I realized this once I had painted everything.

(BTW the Rustoleum paint went on great - it really did have a nice finish!)

So I'm looking at the doors thinking the front looks like crap whereas the backside looks great - I should have never done anything to the doors to begin with because the grain is hardly noticeable!! So, I get the idea of making the backs of the cabinets the fronts. Easier said than done.

First I carefully measured and drilled pilot holes for the hinges on the other side of the doors. I had to then patch up the old hinge holes with, ha, wood filler (apparently this is a more appropriate use for the stuff), and then I had to repaint. I also had to drill hardware holes, since my vanity did not originally have any hardware. Then I applied the final glossy top coat and reassembled everything. It was here during the hours it took to do a job that should have taken 30 minutes, I realized another thing:

CABINET REFACING A-HA MOMENT #1: Label your doors and drawer fronts not only as to where they go but which side originally faced up. 

Didn't originally seem like I would have a problem with this, seeing as though there are only 2 doors and 3 drawer fronts, two of which are the same size, but oh does it matter and how! I spent hours installing, then uninstalling, then installing again those stupid drawer fronts every which way until I finally got them to where they weren't crooked. During this process I discovered the following:

CABINET REFACING A-HA MOMENT #2: Yelling $#&% or @*#& at your cabinets does not make them go on straighter or faster. Tough lesson.

So they are finally DONE!! I sit on the toilet and admire my work (the lid is closed, people! To loosely quote Marge Simpson, "when the lid is up, it's a potty. When the lid is down, it's a chair".  I regret spending the last few minutes trying to find the exact quote and a picture to go with it. *Shudder*.) Anyways, the vanity (sorry about the weird lighting in this pic):

At this point I was still unsure about the wall color because I was afraid of it being too dark in there. I found this inspiration picture, however, and thought it could work:

So I went for it! So after spending 2 days painting and touching up, it's done! All that is left is to add some artwork to the back wall above the toilet!